This snow removal truck is along with snow blade mounted on its front end and a salt spreader on the back of the vehicle. The intelligent control signal achieves wireless connection, so that the operation can be done in the cab.

Snow Plow for Tractor YHQLS-2500B:
This Snow Plow for Tractor is based on a high powered tractor, with a snow blade mounted on its front end and a snow rotary broom mounted on its rear, which makes the snow removal rate up to 95%.

Snow Plow for Tractor YHQLS-2500B Features:
1. Equipped model SL3105BT tractor, strong driving force.
2. This tractor snow plow removes snow very fast, with cost low and operation reliable.
3. This tractor snow plow integrates the snow blade with the powerful snow sweeper, making the snow removal rate up to 95%.
4. The snow blade features a moldboard, with the discharge angle adjustable in double directions; the snow blade is 2400mm wide and it can be angled left or right greater than or equal to 30°.
5. This tractor snow plow is driven by hydraulic system, with operation safe and reliable.
6. The plowing width is 2000mm.
7. The working speed is greater than or equal to 20km/h.

Snow Plow for Tractor YHQLS-2500B Technical Parameters:
Model YHQLS-2500B
Tractor 
Tractor Engine Model SL3105BT
Engine water-cooled, four-stroke diesel engine
Rated Power 29.4 kw
Rated speed 2200 r/min
Rated Traction Force 10320 N
Snow Plow 
Width 2400 mm
Snow Plow width 2000 mm
Snow Plow height 800 mm
Working speed 20 km/h
Snow Plow pattern Flexible cutting edge
Discharge angle 30o
Avoidance mode Spring Avoidance
Drive mode Hydraulic drive
Snow Rotary Broom 
Brush Width 2500 mm;2600 mm;2800 mm
Max deflection angle: 30o
Brush material PP(Propene Polymer)
Brush axle material Seamless steel

Snow Blade for Loader YHZCX-3.8C Features
1.The snow blade features a moldboard, with the discharge angle adjustable in double directions: it can be optionally angled left or right greater than or equal to 30 degrees.
2.The independent hydraulic drive system can work only required to hookup the automobile battery.
3.The operation can be done in the cab, safe and reliable.
4.The upper part of the snow blade is an integral structure; the trip function is achieved by a separated turning plate structure—in the case of any point on the cutting edge hitting an obstacle, the snow blade can go over the obstacle and eliminate itself from reversing when pushing big snow drifts, protecting the snow blade and the vehicle from damage; the maximum surmountable obstacle height is greater than or equal to 200 millimeters.
5.In the process of removing snow, the cutting edge of the blade is self-adjusting according to the cross slope gradient, facilitating the clearing operation.
6.The installation and removal of the snow blade is convenient and quick.

Snow Blade for Loader YHZCX-3.8C Technical Parameters:
Model YHZCX-3.8C 
Dimension 3800*2000*1100 mm 
Width 3.8m(Adjustable) 
Cleaning Width ≥ 3.29m 
Weight 1700 kg 
Operating speed ≥ 30 km/h
Avoidance way Blade Spring avoiding
Turning Angle ≥30o
Slope angle ±5o
Avoidance height 260 mm
zhengzhou yihong snow plow

Snow Plow for Pickup YHCX-QQC2.5

Snow Plow for Pickup YHCX-QQC2.5 :
YHCX-QQC Series Snow Plow are for your pickup, van, Jeep or SUV as well as ATV, with mounting brackets that are custom made for each vehicle and features a remote control to raise and lower the snow plow.Complete with hydraulics.
Snow Plow for Pickup YHCX-QQC2.5 Features:
1. The snow plow can be adjusted in two directions, with the max. deflection angle of 30 degree.
2. Operating in the cab, reliable and safe.
3. The snow plow can adjust automatically according the gradient of the road.
4. Easy to be installed and uninstalled.
5. With reasonal instructure, the blade can push the snow to the side of the road.
6. With independent lighting, convenient for working at night.
7. The snow plow adopts the overturn avoidance way, and the snow plow body can overturn when the snow plow meet obstacles during the working, so as to protect the snow plow and vehicle from damaging or deforming. The max avoidance height is 260mm.

Snow Plow for Pickup YHCX-QQC2.5 Technical Parameters:

Model YHCX-QQC2.5 
Dimension  2500*1200*1150 mm 
Width 2.5m(Adjustable) 
Cleaning Width  ≥2.2m 
Weight 320 kg 
Operating speed ≥ 40 km/h
Applicability 1.5-5ton truck
Avoidance way Overturn avoidance
Max Turning Angle 30degree
Avoidance height 260 mm for Pickup YHCX-QQC2.5
Zhengzhou Yihong-Manufacture of snow removal equpment: snow plow, snow blade, salt and sand spreader, snow thrower, tractor snow plow, snow removal truck and rotary broom for snow removal.

For more information regarding Snow Plow, feel free visit our website and send us mail at - [email protected] our website:http://www.yhsnowplow.com

Hopper Spreader YHRS-4.0:
This hopper spreader is suitable for melting snow and ice on high class highways, urban roads, squares, airports, scenic spot, etc. The hopper spreader is made of carbon steel plate and stainless steel structure that has gone through Sa3 anticorrosion treatment.

Hopper Spreader YHRS-4.0 Features:
1. This hopper spreader can spread salt, snow melting agent, and etc.
2. The spreading width, spreading capacity and driving speed are achieved by intelligent automatic control, with the measurement stable, accurate, and reliable.
3. This hopper spreader is built with carbon steel plate or stainless steel structure, which has gone through Sa3 anticorrosion treatment.
4. The power unit is chosen to use national famous brand generator.
5. The intelligent control signal achieves wireless connection, so the operation can be done in the cab.
6. This hopper spreader uses auger delivery or belt delivery, with operation easy and performance reliable.
7. A mobile mesh is set up over the top of the spreader body case to prevent large particles and foreign objects from entering the facility, ensuring the safety of the equipment.
8. The rain hood over the hopper can guarantee the overall unit to work in rainy and snowy days
9. Equipments are available in bundled products, combining all sorts of modes (hydraulic drive or electric drive) with a variety of specifications (1/4/6/8/10m3), to customize individual needs.

Hopper Spreader YHRS-4.0 Technical Parameters:

Model YHRS-4.0 
Dimensions 4060×2000×1620mm 
Volume 4 m3 
Weight 1.5 t 
Feed delivery Auger delivery 
Spreading capacity 20-150g/ m3 Adjustable
Spreading height Adjustment altitude 0~500 mm
Drive speed ratio 40:1
Spreading width 3-12m Adjustable
Working speed 15-40(km/h) Adjustable
Engine 186FG/6.3kw
"A" series stand for intelligent hydraulic control
"B" series stand for hydraulic control

The main functions of Snow Plow for Truck YHQCX-3.0A is pushing the snow on the roadside, keeping road safty. snow plow for trucks for trucks are widely used for removing snow under the complicated road conditions and clearing the compacted snow. It is an ideal facility for cleaning snow on urban roads, high class highways, and airport in winter time.

Snow Plow for Truck YHQCX-3.0A Features:

1. The snow plow for trucks features a moldboard, with the discharge angle adjustable in double directions; the snow plow for trucks is 3.0 meters wide and it can be optionally angled left or right greater than or equal to 30 degrees.
2. The new type of hydraulic drive system can work only required to hookup the automobile battery.
3. The operation can be done in the cab, safe and reliable.
4. In the process of removing snow, the cutting edge of the blade is self-adjusting in accordance with the cross slope gradient.
5. The installation and removal of the snow blade is convenient and quick.
6. With a lighting system independent of the vehicle body, the snow plow for trucks is convenient for snow removal operation at nights.
7. Reasonably structured, the snow plow for trucks can throw snow out of the highway during the speedy snow removal operation, whereas it can push the snow to the roadside during slow snow removal operation.
8. The snow blade has a "trip" feature that, in the case of any point on the cutting edge hitting an obstacle, the snow blade will tip and go over it, effectively protecting the snow plow for trucks and the vehicle from damage—the maximum surmountable obstacle height is greater than or equal to 260 mm.

Snow Plow for Truck YHQCX-3.0A Technical Parameters:

Model YHQCX-3.0A
Dimension 3000*1260*1650 mm
Width 3.0m(Adjustable)
Cleaning Width ≥ 2.63m
Weight 560 kg
Operating speed ≥ 30 km/h
Applicability 5—10ton truck
Avoidance way Overturn avoidance
Max Turning Angle 30o
Avoidance height 260 mm

Snow Plow for Truck YHQCX-3.0A made by Zhengzhou Yihong Industrial Equipment Co., Ltd.
For more information regarding Snow Plow, feel free visit our website and send us mail at - [email protected] our website:http://www.yhsnowplow.com

Snow Plow for Airport YHQCX-A3.0:
Snow Plow for airport is specially used for cleaning snow in airport, the snow plow is fitted with soft cutting edge to protect the airport floor from damage.

Snow Plow for Airport YHQCX-A3.0 Features:
1. The snow plow features a moldboard, with the discharge angle adjustable in double directions: it can be optionally angled left or right greater than or equal to 30 degrees.
2. The independent hydraulic drive system can work only required to hookup the automobile battery.
3. The operation can be done in the cab, safe and reliable.
4. The upper part of the snow blade is an integral structure; the trip function is achieved by a separated turning plate structure—in the case of any point on the cutting edge hitting an obstacle, the snow blade can go over the obstacle and eliminate itself from reversing when pushing big snow drifts, protecting the snow blade and the vehicle from damage; the maximum surmountable obstacle height is greater than or equal to 200 millimeters.
5. In the process of removing snow, the cutting edge of the blade is self-adjusting according to the cross slope gradient, facilitating the clearing operation.
6. The installation and removal of the snow blade is convenient and quick.
7. With a lighting system independent of the vehicle body, the snow blade is convenient for snow removal operation at nights.
8. Reasonably structured, the snow plow can push snow to one side and function as throwing snow; in the process of clearing snow, the snowshed mounted on the snow plow can prevent the snow from crossing the blade, eliminating the possibility that the snow? Could sprinkle onto the windshield of the vehicle to affect driver's sight.
9. The snow plow is fitted with soft cutting edge to protect the floor from damage.

Snow Plow for Airport YHQCX-A3.0 Technical Parameters:
Model YHQCX-A3.0 
Dimension 3000*1150*1600mm 
Width 3.0m(Adjustable) 
Weight 960 kg 
Cleaning Width ≥ 2.63m 
Max turning Angle 30
Slope angle ±5o
Operating speed ≥ 30 km/h
Avoidance height 200mm
Blade Avoidance way Blade spring avoidance
Applicability 5--8 ton truck 8--15 ton truck

Snow Plow for Airport YHQCX-A3.0:
Snow Plow for airport is specially used for cleaning snow in airport, the snow plow is fitted with soft cutting edge to protect the airport floor from damage.

Snow Plow for Airport YHQCX-A3.0 Features:
1. The snow plow features a moldboard, with the discharge angle adjustable in double directions: it can be optionally angled left or right greater than or equal to 30 degrees.
2. The independent hydraulic drive system can work only required to hookup the automobile battery.
3. The operation can be done in the cab, safe and reliable.
4. The upper part of the snow blade is an integral structure; the trip function is achieved by a separated turning plate structure—in the case of any point on the cutting edge hitting an obstacle, the snow blade can go over the obstacle and eliminate itself from reversing when pushing big snow drifts, protecting the snow blade and the vehicle from damage; the maximum surmountable obstacle height is greater than or equal to 200 millimeters.
5. In the process of removing snow, the cutting edge of the blade is self-adjusting according to the cross slope gradient, facilitating the clearing operation.
6. The installation and removal of the snow blade is convenient and quick.
7. With a lighting system independent of the vehicle body, the snow blade is convenient for snow removal operation at nights.
8. Reasonably structured, the snow plow can push snow to one side and function as throwing snow; in the process of clearing snow, the snowshed mounted on the snow plow can prevent the snow from crossing the blade, eliminating the possibility that the snow? Could sprinkle onto the windshield of the vehicle to affect driver's sight.
9. The snow plow is fitted with soft cutting edge to protect the floor from damage.

Snow Plow for Airport YHQCX-A3.0 Technical Parameters:
Model YHQCX-A3.0 
Dimension 3000*1150*1600mm 
Width 3.0m(Adjustable) 
Weight 960 kg 
Cleaning Width ≥ 2.63m 
Max turning Angle 30
Slope angle ±5o
Operating speed ≥ 30 km/h
Avoidance height 200mm
Blade Avoidance way Blade spring avoidance
Applicability 5--8 ton truck 8--15 ton truck
Zhengzhou Yihong Snow Plows - Snow plows that feature the highest quality components for unmatched durablity and performance in snow plowing.

Starting from January 31, to 2:30 P.M., xinyang team member who has been in Hengyang - zaomupu on high speed work. When the three snow car from Guilin to Hengyang - zaomupu express and Hengyang entrance at the junction of Highway, rescue team jumped off the snow, a snow Board of Plantago : lamb, were worn cannot use. Fu Yingjie pointing to snow blade, Manager of Henan Expressway development led to the company maintenance department Xin Wei says, Hunan high speed are cement, not asphalt surface, snow destroyed too. Took only 30 kilometers, snow Board has basically cannot be used. " How many kilometers a Flanger can sweep? " The reporter asked. " We are asphalt surface of Henan high speed, a panel can sweep 100 km. ” " How much money a Flanger needs? ” " It's not cheap, if complete set replaced need more than 100,000 yuan. " " Don't consider money bad for, I have given you accountable. " Xin Wei specifically.

If you are looking to get more "utility" from your utility vehicle, look no further than  Utility LPV (low-profile v-box). This all-season spreader conveniently fits into the back of today’s most popular utility vehicles and can spread top dressings like fertilizer and seed, as well as salt and sand. It provides greater capacity and increased spreading width than hitch-mounted utility vehicle spreaders.

Zhengzhou Yihong Truck spreader, Snow Plows -  that feature the highest quality components for unmatched durablity and performance in snow removaling.